VentPro Magno Mount 3.0 Series: Magnetic Car Mount for Vents with Custom Metal Plates and Swivel Ball Socket

Check On Amazon

Buying options explained. ADD TO CART: Items are sold and shipped by Dockem. BUY ON AMAZON: See item(s) on Amazon store in your country to see availability & order. Buy with Prime: Checkout and ships with Amazon Prime. US only. 1 item per order max.


Next Previous


  • The Magno Mount 3.0 Series VentPro Mount is a unique smartphone vent mounting solution that provides best-in-class holding power for complete stability in all road conditions. The magnetic head utilizes extra-strength magnets to ensure a secure grip with our included metal plates while the clamps hold strongly to your vent slats.

    Its magnetic head installs on a ball-joint swivel so you can adjust your viewing angle to your comfort zone. Designed for the metal plates to be at the top of the phone to minimize the blocking of the vent.

    The Qi Advantage: Most magnet mounts require your metal plate to be in the middle of your phone which interferes with Qi Wireless Charging. Not the Magno Mount 3.0. The magnetic head is specifically designed to provide extra magnetic hold and grip so you can position the plates at the top of your phone, free and clear of the wireless charging hardware in your phone. So you can use your phone with any wireless charger.

  • Easy Removal Tip
    The extra-strength magnets are used to keep your phone securely on the mount. This can make it difficult to pull the phone directly away from the mount. Always twist the bottom up first, then pull the phone away from the mount. Pulling the phone away directly will put stress on the mount and can damage it. Removal is quick and easy when done this way and will keep your mount safe.

    Magnetic Swivel Head & Support Feet
    The extra-strength magnetic head is installed on a ball-joint swivel, meaning you can direct your phone towards you for a more comfortable sight line. We made the ball-joint larger than our previous versions and included silicone where the ball-joint meets the head. This increases friction and provides more stability to the magnetic head, allowing it to stay at the angle you choose.

    Won't Interfere with Qi Wireless Charging
    In most scenarios, magnetic plates placed at the middle of a device provide the most stable hold. What many people don’t realize, however, is that placing the plate in the middle of a device also blocks wireless charging.
    Our solution to this problem was to make the Magno Mount 3.0 extra strong, so that the location of the plate on the device no longer matters. This allows the plate to be placed at the top of your phone and still provide a secure hold without interfering with wireless charging.

    Micro Metal Plates
    Small and sleek, they attach to the outside of your phone or case with a very strong 3M adhesive. They are meant to be left exposed, so we included 1 in a sleek black finish and 1 in an elegant brushed nickel finish (peel off the blue film).
    With our custom magnetic mounting head, these plates keep your device from twisting while providing strong magnetic adhesion. With the smaller footprint, these can be placed toward the top of most phones so that they don't interfere with wireless charging, and/or placed above the camera module.
    Dimensions: 12 x 40 mm

    Mid-Size Metal Plate Each mount also comes with 1 mid-size metal plate for placement between the phone and case. It is slightly thicker than most plates, providing a stronger hold.
    A smaller footprint allows placement towards the top of the phone on some models without interfering with Qi charging (i.e. to the right of the camera on iPhone XS, iPhone XS Max, iPhone XR). Note that magnetic strength will be highly dependent on your case thickness.
    Dimensions: 35 x 45 mm

  •  

    • Mid-Size Metal Plate
    • 2 Micro Plates
    • Ball Joint Washer
    • Magno Mount 3.0 Magnetic Head
    • Alcohol Prep Pads
    • VentPro Mount
  • Our vent-clamp design unites power and simplicity for an easy-to-use mounting setup. When the switch is flipped up, the clamps are open and ready to slide onto your vent slat. Simply press the switch down to close the clamps and voila, you've mounted your VentPro.

    The VentPro is not meant for use on vertical or highly curved vent slats.

    Dockem M-Series Cases (Sold Separately)
    Our Dockem M-Series cases (sold separately) have an integrated metal plate designed specifically to be compatible with the Magno Mount 3.0 series. They provide the best overall solution with a super strong hold, invisible integration, and no interference with wireless charging.

    Available for most new iPhones and Galaxy phones; iPhone XS/X, iPhone XR, iPhone XS Max, Galaxy Note 10, and Galaxy Note 10 Plus. The M-Series cases come in a variety of styles and colors (any of our cases with M1, M2, or M2T in the name).




Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Ryan Kennedy
I bought one for every member

I bought one for every member of my family with all different kinds of automobiles. Works on every single one and never have to worry about where my phone is going again. Just get in your car put the phone there and boom.

M
Manuel Ortegon
Love it!!!

Love it!!!

R
Robin Judge
Awesome !

I had the previous model and invariably the phone would tilt down and was difficult to see. And the magnet was not terribly strong so my phone would often fall off the mount. This is a huge improvement in the design and keeps my phone at the perfect angle and has a much stronger magnet. I love this phone mount!

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods